ClutchXperts STAGE 5 CLUTCH+FLYWHEEL KIT Fits 2003-2007 HONDA ACCORD 2.4L DOHC
ClutchXperts Stage 5 Miba* Racing Clutch Kit Is a brand new stage 5 Xtreme Duty Racing Pressure Plate With Stage 5 6 Puck Copper Ceramic SOLID Miba Racing Disc Setup can hold and 80% more pressure increase over stock. ClutchXperts Stage 5 Miba* 6 Puck Miba* composite Disc is a best material for friction material in the clutch market uses for. Miba is a material use as Aircraft Brakes which stronger than any other material in the clutch disc industry.
If you want the best the industry has to offer, ask for ClutchXperts 6 Puck Miba* Solid Rigid Copper Ceramic Miba Racing Disc. The ClutchXperts Racing 6 Puck Miba* Disc also uses our high torque internal assembly, but goes one step further in terms of friction. This disc uses an advanced Miba Delivering Aggressive Bite and increased thermal capacity. Uncharacteristic of the typical aggressive racing disc, The ClutchXperts Racing 6 Puck Miba Strip Disc provides outstanding stability, smooth engagement, and less wear on opposing plates. This combination has proven to be premier unit with regards to both performance and drivability for the daily driver with serious torque holding requirement. This system is recommended as the finest quality 'upgrade' from the original equipment clutch. This kit comes with everything you need for a new clutch job or clutch upgrade. Lastly, resurface and rebalance the flywheel prior to installation for best performance and result.
If you see prices way less than others than competitors that means what you get is what you pay for. Made where country with low labor with low craftsmanship with poor materials.
Street Or Long Life Of Clutch Break-In Required. (500miles-1000miles after installation)
Features Of ClutchXperts Stage 5 Miba* Racing Clutch System
1. Heavy Duty Stage 5 Heavy duty racing pressure plate
2. Hi-Leverage Design
3. Precision heat treated single diaphragm
4. Re-Arched Diaphragm for Superior Engagement
5. High clamping force
6. NO unnecessary increase in pedal pressure
7. 6-Wings Ceramic Button Disc without sprung for heavily modified vehcles
8. More Grip Power, longer lasting
• High Temperature Resistance: Up To 930°F (500°C), Short Time Up To 1650°F (900°C)
• Very Smooth Engagement
• High Wear Resistance
• High And Stable Level Of Friction Coefficient
• Negligible Mating Material Wear.
• Miba Generates 3 To 15% Lower Torque Peaks Compared To The Competition; Reduces Gear Shocks Loads And Same Material As Using Aircraft Brakes.
Miba Friction Group Has Been A Development Partner And Supplier Of High-Performance Friction Materials To The Automotive And Machine Industry For Over 30 Years. We Offer Optimized Components For Clutches, And Use High-Quality Materials And Innovative, Technologically Advanced, Processes To Ensure Excellent Wear-Resistance And Friction Coefficients.Clutch Segments Generate The Friction Needed For Torque Transfer From Engine To Transmission, Enabling The Vehicle To Start. They Are Characterized By Particularly High Temperature Resistance And Low Wear.Friction Materials Are An Important Performance Element In Vehicle And Machine Clutches, And Play A Key Role In Overall Efficiency.
Our ClutchXperts Forged Chromoly lightweight flywheel is an ideal performance modification because it has no disadvantages. There are significant benefits of having a lightweight flywheel. Though it does not create additional horsepower, the flywheel does allow the engine to more rapidly transfer its power to the drive train. Due to its reduced mass, it allows an engine to have quicker throttle response and rev faster under acceleration. Conversely, under a drop throttle condition, the car will slow down quicker due to the less rotational mass at the crank. You lose nothing in reliability, safety, or drivability on the street. What you gain is neck-snapping acceleration from your car. If you see prices way less than others than competitors that means what you get is what you pay fo. Made where country with low labor with low craftsmanship with poor materials.
- ClutchXperts STAGE 5 HEAVY DUTY EXTREME 2400LBS CLAMPING LOAD PRESSURE PLATE
- ClutchXperts STAGE 5 6 PUCK SOLID RIGID COPPER CERAMIC MIBA RACING DISC
- ClutchXperts THROWOUT BEARING
- ALIGNMENT TOOL
- 10LBS FORGED CHROMOLY LIGHTWEIGHT RACING FLYWHEEL
- 2004-2008 ACURA TSX 2.4L DOHC K24
- Brand : ClutchXperts
- Manufacture Part Number : CXP-54025HP5-EXE-SOL-TSX CXP-54025CF
- Surface Finish : CAST IRON, COPPER CERAMIC MIBA, CHROMOLY
- Torque : 427 ft-lb
- Horse Power : 448Hp
- Warranty : Yes
- Country of Manufacture : United States
**FILE PICTURES ARE FOR REFERENCE ONLY. ACTUAL ITEM MAY VARY
- Free shipping within lower 48 States via USPS Standard. For Expedited Shipping please refer to Payment options.
- Email us for AK, HI, PR and International Shipping Rate (USPS Priority Air Parcel).
- PAYPAL CONFIRMED ADDRESS ONLY. WE DO NOT SHIP OTHER THAN A PAYPAL CONFIRMED ADDRESS.
- FREE SHIPPING WITHIN 48 CONTINENTAL STATES (3-6 BUSINESS DAYS) VIA USPS STANDARD PARCEL.
- 3 PRIORITY SHIPPING, YOU CAN SELECT USPS PRIORITY AS SHIPPING OPTION, JUST ADD $15.00.
- FOR INTERNATIONALS SHIPPING $89.00 AND $169.00 FOR CLUTCH AND FLYWHEEL COMBO SET VIA USPS PRIORITY AIR MAIL.
- For 2-6 Business days DHL Express For Urgent please send message thru eBay messaging system for quotation.
- DHL EXPRESS IS THE FASTEST WAY TO GET YOUR ORDER FOR INTERNATIONAL BUYERS!! WITHIN 10 Days UK Guaranteed!
- RMA # : Message us through eBay for RMA#.
We do not allow any return without RMA#.
- Return Shipping : Buyer is responsible for return shipping cost.
- Exchange : Up to 30days from of purchase (Brand new condition, no restocking fee).
- Return :
- All returns will be subject to 20% restocking fee.
- Return your purchase for up to 30 days from date of purchase for a refund.
- Must be in brand new, resalable condition.
- Damaged Item : Message us through eBay.
- Manufacturer Warranty : 3 months or 3,000 miles(whichever comes first) from the date of purchase.
- RMA # : Message us through eBay for RMA#.
We are located in Southern California
Please contact us through eBay messages by clicking on "Ask a Question".
Business Hours : 9AM - 5PM Mon-Fri (Pacific Standard Time).